Lesson 43: System Manual (Technical Specs)

Technical Manual

> MODULE 43 // SCANNING FOR SPECIFICS

1

 Technical Glossary

VoltageNoun

កម្លាំងអគ្គិសនី (វ៉ុល)/ˈvoʊl.tɪdʒ/

The force of an electric current, measured in volts.

IndicatorNoun

ភ្លើងសញ្ញា / សូចនករ/ˈɪn.də.keɪ.t̬ɚ/

A light or gauge that shows the state or condition of a machine.

Operating TempNoun Phrase

សីតុណ្ហភាពប្រតិបត្តិការ/ˈɑː.pə.reɪ.tɪŋ temp/

The temperature range in which a device works safely.

MaintenanceNoun

ការថែទាំ/ˈmeɪn.tən.əns/

Work done to keep a machine in good condition.

HazardNoun

គ្រោះថ្នាក់/ˈhæz.ɚd/

A potential source of danger.

TroubleshootVerb

ដោះស្រាយបញ្ហាបច្ចេកទេស/ˈtrʌb.əlˌʃuːt/

To trace and correct faults in a mechanical or electronic system.

2

 Specs & Status

Router X-200 Rev. 4.2

Input Voltage	100V - 240V AC
Operating Temp	0°C to 45°C
IP Rating	IP20 (Dry loc only)
Power Output	12V DC, 2A

Status Indicators

Solid Green: System Normal / Connected

Blinking Red: Critical Error / Overheat

3

 Safety & Fixes

⚠️

Electric Shock Hazard

Do not open the device case. No user-serviceable parts inside. Refer servicing to qualified personnel only. Keep away from water.

Troubleshooting: No Internet

1. Check if the Power LED is solid green.

2. Unplug the device and wait 10 seconds.

3. Plug the device back in (Reboot).

4. If Red LED blinks, contact support.

4

 Data Verification

1. What happens if the temperature goes above 45°C?

2. What should you do if there is no internet?

3. Can you repair the inside of the device yourself?

4. What does a Blinking Red light indicate?